MOD-WELD-logo-with-robot-websize

Dual Station H-Frame

The H Frame weld cell provides a robust, efficient and high payload platform for welding a wide array of high volume components.

MOD-WELD Dual Station H-Frame Specs
Exclusive with FANUC Robot
System ModelDSHF-72-AM120DSHF-96-ASM120
6-Axis RobotARC Mate 120iDARC Mate 120iD/12L
Robot Reach72"89"
Cell Footprint134" x 260"158" x 260"
Headstock/Tailstock Span72"96"
Max Payload1,000lbs Each Station900lbs Each Station
Available I/O8 in 8 out
Available Valve Bank Space(4) closed center / (4) Blanks
Operator Interface/RecipeRockwell PLC/HMI Interface
Max outboard Servo Rotation Diameter32"
Floor to Center Outboard Servo38.75"
Tips & TricksFANUC CRX Tips & Tricks
Options
Part NumberPart Description
TRTip Reamer, Nozzle Spray, & Wire Snip all in one system. Available with either power supply.
ABIO-8Additional Allen Bradley I/O, 8 in 8 out
SY7301-5U1-NAAdditional 3 position closed center valve

MOD-WELD Dual Station H-Frame

View our Modular Welding Solutions Catalog
  • FANUC Robot / Rockwell Controls / Integrated by APT Manufacturing
  • Ease of set up
  • Easy maintenance and cleanliness
  • Recipe Management with room for up to 100 recipes
  • Base model is configured to weld steel (hard metal), soft metals require additional options
Choose Your Power Supply
FroniusMiller
400iTPSi, air-cooled torch for welding steel. Comes with .035 wire feed rollers 3PH Power. Optional consumable or replacement parts up to 1/16350CAuto-Continuum™ 3PH or Auto-Deltaweld™ 1PH, air-cooled torch for welding steel. Comes with .035 wire feed rollers. Optional consumable or replacement parts up to 1/16
400iTPSi, air-cooled torch for welding steel. Comes with .035 wire feed rollers 3PH Power. Optional consumable or replacement parts up to 1/16350DAuto-Continuum™ 3PH or Auto-Deltaweld™ 1PH, air-cooled torch for welding steel. Comes with .035 wire feed rollers. Optional consumable or replacement parts up to 1/16
400i-CTPSi, cooler & water cooled torch. Comes with .035 wire feed rollers 3PH Power. Optional consumable or replacement parts up to 1/16500C-CAuto-Continuum™ or Auto-Deltaweld™, cooler & water-cooled torch Comes with .035 wire feed rollers. 3PH Power. Optional consumable or replacement parts up to 1/16
500i-CTPSi, cooler & water cooled torch. Comes with .035 wire feed rollers 3PH Power. Optional consumable or replacement parts up to 1/16500D-CAuto-Continuum™ or Auto-Deltaweld™, cooler & water-cooled torch Comes with .035 wire feed rollers. 3PH Power. Optional consumable or replacement parts up to 1/16
400i-C-STPSi, cooler, water-cooled torch, push/pull CMT ready package for both steel (hard wire) & aluminum (soft wire) Equipped with 3/64 start-up consumables & drive wheels for aluminum welding. 3PH Power500C-C-SAuto-Continuum™ 500, cooler, water-cooled FANUC Servo Torch to pull the wire. Equipped with 3/64 start-up consumables & drive wheels for aluminum welding. 3PH Power
500i-C-STPSi, cooler, water-cooled torch, push/pull CMT ready package for both steel (hard wire) & aluminum (soft wire) Equipped with 3/64 start-up consumables & drive wheels for aluminum welding. 3PH Power500C-C-SAuto-Continuum™ 500, cooler, water-cooled FANUC Servo Torch to pull the wire. Equipped with 3/64 start-up consumables & drive wheels for aluminum welding. 3PH Power
Tips & TricksFronius TPS/i Tips & TricksTips & TricksMiller Auto-Continuum™ Tips & Tricks
Available TrainingMiller OpenBook
Software Options
Fronius
PMCFronius Pulse Multi-Control, regulated, low-spatter droplet detachment. At the same time, PMC generates a stable arc which results in perfect control of the weld pool.
LSCFronius Low Spatter Control, achieves high-quality weld seams with minimal spattering and increased deposition rate, as the LSC principle is based on the short circuit occurring at a low current level. This leads to soft reignition and a stable welding process.
CMTFronius Cold Metal Transfer (CMT) welding, only available in CMT ready machines. Ideal for high performance welding in the areas of thin materials, brazing, visual aesthetics, cladding & WAAM welding consisting of all ranges of materials from Aluminums, Steels, Coppers, Titanium, & Nickel alloys
FANUC
TPWFANUC Thick Plate Weld Package is Touch Sensing & Through Arc Seam Track in one package. This robot/cobot software is available on both Fronius & Miller
hmi graphic

Our standard MOD-WELD systems use APT’s efficient and easy to use operator interface.

Ready to get started?

Interested in APT’s products?

MOD-WELD Promo

YouTube player

Downloads

Other ARC Mate MOD-WELD Models

Single Station Fixed Wide MOD-WELD ARC Mate Dual Station Fixed MOD-WELD ARC Mate Dual Station Rotary MOD-WELD ARC Mate Dual Station H-Frame MOD-WELD ARC Mate Headstock/ Tailstock MOD-WELD ARC Mate
  • FANUC Authorized System Integrator Logo
  • ISO Logo
  • Made in the USA
  • Rockwell Automation Silver OEM Partner
  • Copyright © 2024 APT Manufacturing Solutions
APT will close for the holiday week of July 4th, starting at noon on June 28th, 2024 through July 7th, 2024
We will resume full-time operations on Monday, July 8th, 2024.
+