Cobot Cut Traveler

Collaborative Robot for Plasma Cutting

The MOD-CUT Traveler Series features 2 designs, the Traveler 25 and the Traveler 10L. These are designed and manufactured exclusively around the FANUC CRX-25iA & CRX-10iA/L collaborative robots and are extremely easy to setup, program, and operate – even if it’s your first robot. This was designed to work off your existing table or production line. It is on a mobile base that holds everything you need.

MOD-CUT Traveler Specs
Exclusive with FANUC Cobot
System Model	TRV25	TRV10L
6-Axis Robot	FANUC CRX-25iA	FANUC CRX-10iA/L
Robot Reach	74”	55"
Robot Power	120v 20 amp	120v 20 amp
Robot Programming	Tablet only	Tablet Only
Robot Torch Guidance	Clever Torch Teach Guidance	Clever Torch Teach Guidance
Torch Roller Dress-out	APT Custom Rollers	APT Custom Rollers
Footprint (for mobility)	44” W x 76-1/2” D	38" Dia 77" T
Footprint (outriggers deployed)	88-1/2" W x 93-3/4" D	N/A
Approx Weight	1700 lbs	300 lbs
Equipment Options
Part Number	Part Description
DDT4058	Fume Extractor 40" x 58" Downdraft Table with 6" duct (Fume extractor sold separately)
FE1200	1200 CFM Fume Extractor, sold separately, 8" to 6" duct
BB34364	Burn Box for plasma cutting, 34” W x 36” L x 4” H, with steel slat supports every ¾”, includes (6) work holding toggle clamps. Can be used with MOD-CUT Cart or Down Draft Table. Requires Down Draft Table to work with the traveler.
TORCH-H-1	25' Hypertherm manual plasma cut torch kit. Includes SmartSYNC hand torch, leather torch wrap, clamp cable, and 5 pcs of drag‑cutting consumable cartridges.
HSTS-C-60	The Headstock/Tailstock works with both the Cobot Cart & the Traveler. It features a Nabtesco gearbox, a FANUC servo motor, and area scanners for safety.

MOD-CUT-Traveler-with-side-table-and-fume-extractor 8y0m

View our Fabrication Solutions Catalog

Power Supply

Hypertherm Powermax SYNC®

The Powermax SYNC® plasma cutter is a next-generation professional grade air plasma cutter that dramatically simplifies system operation for gouging and cutting. Features automated system process set-up via advanced RFID‑enabled SmartSYNC® torches and a revolutionary single-piece cartridge consumable that provides trackable utilization data.

Cut Capacity

Cut Capacity
Powermax SYNC®	65	85	105
Pierce	5/8"	3/4"	7/8"
Max Cut Thickness	3/4"	1"	1-1/4"
Severance	1-1/4"	1-1/2"	2"
Output Range	20-65	25-85	30-105
Input Phase	Single or Three

Application Capabilites

Mechanized Cutting
Drag Cutting
FineCut
FlushCut™
Max Control Gouging
Max Removal Gouging
HyAccess™

Software Options

Software Options
Part Number	Part Description
RMS-3D	Robotmaster is an offline CAD/CAM software to aid in programming ahead of production.
FANUC SHAPE GEN	Shape Gen is a FANUC Software that aids in programming through the tablet.